Details
Wet Sounds Syndicate Series Marine Amplifiers represent the highest performing marine audio amplifiers on the market. With advanced technologies like Class H and Class G/H power supplies for high power with less current draw and less heat. Microprocessor controlled forced fan cooling, full polished stainless steel chassis for true marine grade, conformal coated PCB boards, advanced microprocessor protection circuit for under/over voltage, thermal overload and short protection, flexible crossovers for both high pass and low pass use on full range models, and matched power ratings to drive all Wet Sounds speakers.
The SYN1 is a class G/H monoblock subwoofer amplifier. With the unique class G/H power supply, the SYN1 has enormous power with less current draw and cleaner sound quality than many of the class D subwoofer amplifiers on the market. Resulting in clean tight and deep bass.
Recommended Configurations:
- (1) XS-XXX subwoofer at 4 ohms. Power: 850 x 1 (recommended)
- (1) XS-XXX subwoofer at 1 ohm. Power: 1000 x 1
- (1) XS-12 subwoofer at 8 ohms. Power: 450 x 1
- (2) XS-12 subwoofers at 4 ohms. Power: 850 x 1
- (2) XS-12 subwoofers at 1 ohm. Power: 1000 x 1
The SYN1 is a class G/H monoblock subwoofer amplifier. With the unique class G/H power supply, the SYN1 has enormous power with less current draw and cleaner sound quality than many of the class D subwoofer amplifiers on the market. Resulting in clean tight and deep bass.
Recommended Configurations:
- (1) XS-XXX subwoofer at 4 ohms. Power: 850 x 1 (recommended)
- (1) XS-XXX subwoofer at 1 ohm. Power: 1000 x 1
- (1) XS-12 subwoofer at 8 ohms. Power: 450 x 1
- (2) XS-12 subwoofers at 4 ohms. Power: 850 x 1
- (2) XS-12 subwoofers at 1 ohm. Power: 1000 x 1
Technical Specs
Need help choosing the right Wetsounds product for you? Contact your nearest local dealer.
Mono @ 8 Ohms | 450 x 1 watts RMS |
---|---|
Mono @ 4 Ohms | 850 x 1 watts RMS |
Mono @ 2 Ohms | 1000 x 1 watts RMS |
Mono @ 1 Ohm | 1000 x 1 watts RMS |
s/n ratio @ 1 watt | > 70 dB |
Impedance | - |
Freqency Response (Hz) | - |
Transient Distortion | < .01% @ 4 Ohms |
Input Sensitivity | 0.2 V - 4.5 V |
Input Impedance | 20K Ohms |
Bass Boost | +15 dB @ 45 Hz |
Crossover | LP 30 Hz - 220 Hz |
Max Input (W) | - |
Max Output (W) | - |
Efficiency (dB/W/m) | - |
Mounting Depth (mm) | - |
Dimensions Inches ( L x W x H ) | 15 1/2" x 8" x 2 3/8" |