Details
SD6: 6 Channel Amplifier
The Sinister amplifiers use superior performance circuitry by utilizing Wet Sounds exclusive Class D Power Supplies combined with Wet Sounds MAXED™ Power supply. The MAXED power supply is a patent pending technology designed to provide high-efficiency levels never thought to be achievable in a mobile audio amplifier. What this means to you. Less current draw, less strain on the electrical system, less generated heat. All this results in more play time! The Sinister amplifiers share one size full cast aluminum chassis for all models making installation a breeze and the ability to have a clean install.
All Sinister amplifiers feature a fully conformal coated 4 layers PCB board, single side power, speaker and input section, and top mounted controls with removable cover. Sinister amplifiers have a backlit Wet Sounds shield logo with selectable illumination for red, white or blue that can be mounted horizontally or vertically for flexible amplifier placement. Other features include high pass/low pass/full range crossovers, flexible inputs source selection for single or multiple RCA channel input, RCA pass through on 4ch and 2ch, and removable speaker plugs that accept large gauge wire. The sinister amplifiers are not only extremely powerful but also intelligent with a built-in microprocessor controller for over voltage protection, under voltage protection, DC offset, and speaker short protection, as well as thermal rollback to ensure consistent play in the harsh marine environment.
The Sinister amplifiers use superior performance circuitry by utilizing Wet Sounds exclusive Class D Power Supplies combined with Wet Sounds MAXED™ Power supply. The MAXED power supply is a patent pending technology designed to provide high-efficiency levels never thought to be achievable in a mobile audio amplifier. What this means to you. Less current draw, less strain on the electrical system, less generated heat. All this results in more play time! The Sinister amplifiers share one size full cast aluminum chassis for all models making installation a breeze and the ability to have a clean install.
All Sinister amplifiers feature a fully conformal coated 4 layers PCB board, single side power, speaker and input section, and top mounted controls with removable cover. Sinister amplifiers have a backlit Wet Sounds shield logo with selectable illumination for red, white or blue that can be mounted horizontally or vertically for flexible amplifier placement. Other features include high pass/low pass/full range crossovers, flexible inputs source selection for single or multiple RCA channel input, RCA pass through on 4ch and 2ch, and removable speaker plugs that accept large gauge wire. The sinister amplifiers are not only extremely powerful but also intelligent with a built-in microprocessor controller for over voltage protection, under voltage protection, DC offset, and speaker short protection, as well as thermal rollback to ensure consistent play in the harsh marine environment.
Technical Specs
Need help choosing the right Wetsounds product for you? Contact your nearest local dealer.
| Stereo @ 4 Ohms | 6 x 185 Watts @ 95A |
|---|---|
| Stereo @ 2 Ohms | 6 x 290 Watts @ 168A |
| Mono @ 4 Ohms | 3 x 585 Watts @ 168A |
| Impedance | - |
| Freqency Response (Hz) | - |
| Input Sensitivity | Low Level 0.2V - 6.1V |
| Bass Boost | 0-12.5dB @ 27Hz - 110Hz |
| High-Pass Crossover Frequency | 30Hz - 300Hz 12dB/Octave |
| Low-Pass Crossover Frequency | 30Hz - 300Hz 12dB/Octave |
| Signal To Noise Ratio | >87dB >109dB |
| Remote Level Range | 0 db to -61 db |
| Max Input (W) | - |
| Max Output (W) | - |
| Efficiency (dB/W/m) | - |
| Mounting Depth (mm) | - |
| Notes | Output Power (RMS) @ 1% 1000Hz 14.4V CEA 2006. 15.6V Overvolt Protection. |